EmailFT-3000 flue gas emission continuous monitoring system is an advanced equipment which adopts in-situ extractive FTIR analyzing technology. It works in the way of full-time high-temperature heat tracing (thermal wet method), and can accurately measure a variety of flue gas components, including SO2 , NOX (NO, NO2 ), HCl, CO, O2 , humidity, temperature, pressure, and flow rate and other parameters.
The innovative design and multifaceted analytical capabilities of the FT-3000 continuous flue gas emission monitoring system make it a reliable and comprehensive monitoring solution, widely used in industrial emissions and environmental monitoring.
Multi-component measurement: simultaneous monitoring of SO2 , NOx (NO, NO2 ), CH4 , HCl, HF, CO, CO2 , N2 O, H2 O, O2 , etc.
Strong anti-interference: non-linear least squares iterative algorithm, effectively avoiding cross-interference between components and influence of water vapor;
FTIR technology: wide spectral range, multiple measurable components, wide measurement range, low detection limit, able to meet a variety of requirements;
High-temperature heat tracing of 180℃ throughout the whole process to avoid inaccurate measurement caused by flue gas condensation and crystallization;
Other parameters and factors expandable according to actual needs.
Parameters: SO2 , NO, NO2 , CO2 , H2 O, HCl, HF, CH4 , CO (FTIR), O2 (zirconia)
Power supply: AC (220±22)V; (50±1)Hz
Rated power: ≈ 5000W (heat tracing pipe included)
Ambient temperature: 15℃~35℃ (indoor); -20℃~50℃ (outdoor)
Ambient humidity: ≤ 85%RH, non-condensing
Heat tracing temperatur: 180ºC
Flow rate: 2L/min
Indication error: ?2.5%F.S.
Repeatability: ≤2%
Zero drift: ≤2.5%F.S./d
Span drift: ≤2.5%F.S./d
Response time: ≤200s
